South Bend Tools
For Machines Mfd. Since 9/20
Model SB1092 & SB1094
-19-
P R E P A R A T I O N
Figure 19. Drum lock handle attached to side panel.
Figure 20. Inlet adapter attached to inlet port.
11.
Attach drum lock handle to side panels
with (8) M5-.8 x 8 Phillips head screws (see
Figure 19).
12.
Remove pre-installed screw from inlet
adaptor, then attach inlet adaptor to housing
assembly and tighten pre-installed screw to
secure (see Figure 20).
x8
Inlet
Port
Inlet
Adapter
10.
Attach cone to housing assembly with cone
clamp, then tighten pre-installed hex bolt to
secure (see Figure 18).
Figure 18. Cone attached to housing assembly.
Figure 16. Quick connector attached to dust hose.
9.
Attach drum lid to bottom of cone with (6)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see Figure 17).
Figure 17. Drum lid attached to cone.
8.
Attach quick connector(s) to open end(s) of
2" hose(s) with 2" hose clamp(s) (see Figure
16).
x6
2" Dust
Hose
Quick
Connector
Hex Bolt
Cone Clamp
Drum
Lid
Cone
2" Hose Clamp