6
DISPOSING OF PACKAGING
The packaging materials (cardboard box, plastic strap and polyurethane foam) can be disposed of as normal
domestic waste; there is no difficulty in disposing of them. If the machine is installed in a country in which
special regulations apply, dispose of the material in a regulatory manner.
ELECTRICAL HOOKUP
The machine has a power cable (3x1.5 mm² x 2.5 m) and a 16A Shuko plug. Connect the 230 V 50 Hz machine
by installing a 10A ΔI = 0.03A residual-current device on the line. Also check that the information on the
machine's nameplate match the specifications given in the delivery and shipping documents, and that both the
master switch and cable are easily accessible while the machine is in use.
INSTALLATION
POSITIONING
The SousVideTools
®
Platinum 2.0 Thermal Circulator has been designed to be used with normal cooking tanks
(1/1 or 2/1 H. 200, as shown in fig. 5), and in general with tanks of capacity up to 43 litres and a maximum
depth of 200mm.
The Platinum 2.0 must be supported by a special profile member (ref. 1 fig. 5) on the edge of the tank, and
secured with the knob (ref. 2 fig. 5).
Fill the tank with water, taking care to observe the maximum and minimum level markings. If the tank is filled
to below its minimum level, the Platinum's level sensor will prevent it from starting, the machine will emit
beeps and an error message (H2o Low) will appear on the display.
Follow the instructions to the letter and do not exceed the maximum level marked on the side of
the machine (fig 5); avoid splashing when filling the tank or loading it with the bags.
Fig. no 5
