7
Error
The Vacuum
Sealer does not
pull a complete
vacuum or seal
automatically
Fail to seal
Check if the bag open mouth is totally inside the chamber.
Check if the gasket is loose.
Check if for any particle on the seal foam or gasket, is the seal foam properly assembled.
Check if the lid is locked.
Check if there is leakage in the bag. Check by putting the bag into water, press the bag, if
there are bubbles then there is leak. Change bag.
The machine may have over run. Rest the machine between cycles. The break should
be at 20 seconds between every seal.
Any wrinkles, grease, liquid or other debris on the open end of the bag will cause an
issue. Try a new clean bag.
There may be moisture or debris on the sealing bar. Clean the bar, and seal again.
Vacuum bag
loses vacuum
after being
sealed
Any wrinkles, grease, liquid or other particles on the seal could cause this issue, please
open the bag, clean the bag mouth and vacuum again.
Check if there is any moisture or liquid on the food, if yes, open the bag and vacuum
again, or change to a new bag. If the food is juicy it is suggested you consider freezing
before vacuum.
WARRANTY & AFTER SALES SERVICE
1
Make sure the working platform is flat, clean and tidy.
2
Warranty is limited to damage caused by production defects.
3
The cost of parts and maintenance will be charged due to improper use or other non-product quality problems.
4
Please keep the purchase vouchers.
Maintenance Card
First Name:
Phone:
Address:
Machine Model:
Supplier:
Last Name:
Email:
Purchase Date:
