Sourse WIDESLIDE, Care And Use Instructions Manual, Page: 5 / 19

6
Filling the reservoir
FIRST USE: Before drinking it is strongly recommended to
rinse the reservoir with water and drain it through the tube
and valve. Follow the instructions for filling and operating
the valve BUT DON'T DRINK YET.
Before drinking you will be instructed how to drain the water
you filled in the resrevoir.
To fill:
1. Disconnect the tube from the reservoir by pressing the
release button of the SQC™ connector at the bottom of the
reservoir.
2. Open reservoir by sliding off Widepac™-Closure sideways
and unfold the top. (drawing 1)
3. Insert your thumb and forefinger into both holes of the
Widepac™ holder and press lightly inward as shown in
drawing 2 to widen the Widepac™ opening.
4. Fill the reservoir.
5. Fold top and close reservoir’s wide opening by sliding back
Widepac™-Closure. (drawing 3)
The reservoir is designed to store cold as well as warm
drinks (up to 60ºC/140ºF).;
You can add ice for cold drinks, or even freeze water in the
reservoir overnight (only 3/4 fill).
7
Filling the reservoir
OPEN
1
2
3
CAUTION Do not fill with boiling water.
NOTE
Only one end of the Widepac™-Closure is
open, but you can slide it onto the reservoir
top from left or right.