Sourse WIDESLIDE, Care And Use Instructions Manual, Page: 17 / 19

18
HELIX™-Valve Secondary Disassembly
This should be performed only if HELIX™-Valve
is severely soiled.
To disassemble the HELIX™-Valve:
1. Set HELIX™-Valve to OPEN position
2. Operate carefully: Pull the silicone tip firmly away
from the valve, (drawing 18). This will reveal
the inner mechanism of the valve consisting
of a springed pin (A) and the base socket (B)
Attention! Make sure you do not lose the
springed pin (A)
To Re-assemble the HELIX™-Valve:
1. Insert the springed pin (A) in its base (B)
2. Adjust the rim of the silicon tip on the base
3. Push the tip firmly in its place. Make sure it goes all the
way until the rim of the silicon tip is against the rim of the
base (C). (drawing 19).
19
A
B
C
RIGHT WRONG
HELIX™-Valve Secondary Disassembly
18
19