28
Tips
Cord Replacement on Filler-Cap
1. Remove central plug from Filler-Cap by firmly pulling
the cord threaded to the plug (drawing 26).
2. Thread one end of the replacement cord through
the central hole on the plug and make a knot at this
end leaving as little slack as possible (drawing 27).
3. Thread the other end of the replacement cord
through the hole on the tightening ring,
and make another knot.
4. Insert the plug firmly into the Filler-Cap
(drawing 26).
Keeping the Dirt-Shield™ from bouncing
1. To keep the Dirt-Shield™ valve cover from bouncing
on its cord, pull the knot on the cord until the Dirt-
Shield™ touches the angled fitting (drawing 28),
then encircle the cord three times around itself
(drawing 29).
2. Perform in reverse order to place the cover back on
the Storm-Valve™ (drawing 28) .
Summary of Contents for WXP LP
