SA260
Nemesis Delay User’s Guide
48
The foregoing limited warranty is the only warranty given by Source Audio and is in lieu of all other
warranties. All implied warranties, including warranties of merchantability and fitness for any
particular purpose, exceeding the specific provisions of this limited warranty, are hereby disclaimed
and excluded from this limited warranty. Upon expiration of the applicable express warranty period,
Source Audio shall have no further warranty obligation of any kind, express or implied. Source Audio
shall in no event be liable for any special, incidental, or consequential damages suffered by the
purchaser or any third party, including without limitation, damages for loss of profits or business or
damages resulting from use or performance of the product, whether in contract or in tort. Source
Audio shall not be liable for any expenses, claims, or suits arising out of or relating to any of the
foregoing. Some states do not allow the exclusion or limitation of implied warranties so some of the
above limitations and exclusions may not apply to you. This Limited Warranty gives you specific legal
rights, and you may also have other rights, which vary, from state to state. This Limited Warranty
only applies to products sold and used in the USA. Source Audio shall not be liable for damages or
loss resulting from the negligent or intentional acts of the shipper or its contracted affiliates. You
should contact the shipper for proper claims procedures in the event of damage or loss resulting
from shipment.
Version History
December 29, 2015: Initial Release
January 15, 2016: Fixed numerous typos. Updated
control layout image
. Added Neuro App
engine
overwrite
description.
January 29, 2016: Firmware Version 1.12 released. Added
Kill Dry
Mode. Updated
Preset LED
descriptions. Updated
On/Off LED
description for trails mode. Added
TRS expression
description for
Control Input. Added
min and max delay times
for each engine. Added
Custom CC Mapping
section.
Added
Intensity/Mod/Rate knob reassignment
description.
February 1, 2016: Added sections describing how to connect an external switch as an expression
toggle for the
Pedal In port
or the
Control Input port
. Added description of
One Series Neuro
Couplers
.
©Source Audio LLC | 120 Cummings Park, Woburn, MA 01801 |
www.sourceaudio.net
