Source Audio Lunar Phaser, User Manual, Page: 14 / 31

SA241 Lunar Phaser User’s Guide 14
The Neuro App and USB Editor provide access to extended effect types that may have special LFO
shapes that differ from the standard sine, square and sawtooth. Using the USB Editor, you can even
create your own custom LFO wave shapes.
Effect Switch
Selects between the three basic phaser effect types – Vibe, Classic, or Multi. These effects are
described in further detail in the
Effect Types section.
LEDs
Engage / Bypass LED
The Engage / Bypass LED above the footswitch indicates if the phaser effect is active (lit green) or
bypassed (not lit).
When the user preset mode is enabled, the LED will turn red. See the Preset Storage and Recall
section for more information about user presets.
External Control LED
The small LED located between the Depth and Speed knobs is the External Control LED. When lit, it
indicates that external control mode (expression, hot hand, or MIDI) is active. For more information,
see the
External Control section.
Footswitch
Enables or bypasses the phaser effect.
Control Input Button
This small button is used when configuring external control. See the External Control section for
more details.
Preset Storage and Recall
The Lunar features a user preset that can be easily saved and recalled using the footswitch. When a
preset is recalled, all of the parameters instantly jump to their saved value, regardless of the position
of the knobs. This allows you to save your favorite sound without having to worry about the knob
positions.
Saving Your First Preset

Bypass the Lunar by clicking the footswitch once. The engage/bypass LED should be dark at this
time.

Press and hold the footswitch for 5 seconds and wait for the engage/bypass LED to turn red.
You are now in preset mode.

Set up the effect how you want it to sound, including the effect switch, depth, speed,
resonance, and shape knobs. Once you have made a change, the engage/bypass LED will begin
to blink.

To save your preset, hold the footswitch until the LED blinks rapidly 3 times.

Now you can engage and bypass the Lunar using the footswitch, and each time you engage the
effect, your saved preset will be recalled.