Page 14
Time Period Programming
OWNER'S MANUAL
After you have completed setting the time
period programming, you have two options:
1) Run the time period program by pressing
the PROGRAM button two times.
OFF
RUN
SET
PROGRAM
OFF
RUN
SET
PROGRAM
or,
2) Do not run the time period program by
pressing the PROGRAM button one time.
The thermostat will operate as a manual
heat, cool or auto thermostat.
The OVERRIDE button may be used to interrupt the normal time
schedule programming of the thermostat. Override may only be used
when the thermostat is running the time schedule, in Program On
mode.
Unoccupied Operation -
During programmed, unoccupied
periods, pressing the OVERRIDE button will temporarily
force the thermostat into Occupied 1 comfort settings for 30
minutes. The remaining Override time will alternate with the
clock. The Override timer can be set up to a maximum of four
(4:00) hours, in increments of 30 minutes. If the timer has been
set for the maximum time, the next press of the OVERRIDE button
will reset the timer, returning the thermostat to the correct time
period program for the day.
Pressing the MODE button will also reset the Override timer,
returning the thermostat to the correct time period program for
the day.
Occupied Operation -
During programmed, occupied periods, a
press of the OVERRIDE button will force the thermostat into an
unoccupied period for the remainder of the day. During this
forced unoccupied period the OVERRIDE button will operate as
described in the Unoccupied Operation section (see above).
OVERRIDING THE PROGRAM
S1-THEM22P7S
