Page 13
Copying the Program
Time Period Programming
OWNER'S MANUAL
Select Yes to copy
the previous day’s
program to the day
displayed.
The copy command becomes available after the maximum #
of occupied periods are programmed in a day. This
example uses only one occupied period.
If Yes is selected:
If No is selected:
If
No
is selected, as in the previous step, flashing prompts
for input will appear for the time periods for the next day.
Selecting Yes, then pressing NEXT
will copy the previous day’s program.
If yes is selected again, or each time,
this routine will repeat.
Press
Press
NEXT
NEXT
After programming for all seven days is complete, press the
PROGRAM button to leave the Setup screens. If no buttons
are pressed, the display will leave the setup screens after
30 seconds.
OFF
RUN
SET
PROGRAM
PROGRAMMING TIPS
If only the Occupied 1 period is selected in the first programming step (
page 11
), Occupied 2
& 3 programming steps are skipped. Furthermore, if Occupied 2 is selected, Occupied 3
programming steps are skipped.
Heat & Cool setpoints for Occupied 1 are the same for every day of the week. If desired,
Heat & Cool setpoints for Occupied 2 & 3 can be adjusted differently for each day of the
week.
If the start time is set later in the day than the stop time,
the program will run from the
start time to midnight and from midnight to the stop time on the same day.
For example: 9pm
start, 8am stop, on Monday. In this example the program will run from 12am Monday to 8am
Monday and again from 9pm Monday to 12am Tuesday.
Unoccupied Operation:
The unoccupied settings take effect at all times when: (
1
) the
program is on
and
(
2
) the current time is outside a preset occupied period. For this reason
start and stop times are not necessary for unoccupied time periods.
If the
same
start and stop times are programmed for an occupied period, then it will run 24
hours.
If one occupied period starts and stops within another occupied period the lower occupied #
has priority.
For example: If Occupied 3 is programmed to be on 24 hours, and Occupied 2 is
programmed to run that day, then the Occupied 2 setting will take over for Occupied 3 between
Occupied 2 start and stop times.
Tu
S1-THEM22P7S
