7
Quick Start
Selecting your desired temperature
AUTO-CHANGEOVER MODE —Pressing the WARMER or COOLER buttons in
Auto mode will adjust both the heat and cool setpoints simultaneously. To
adjust heat and cool setpoints individually, choose HEAT mode to adjust the
heat setpoint and COOL mode to adjust the cool setpoint, then return to AUTO
mode.
HEAT OR COOL MODE—Pressing the WARMER or COOLER buttons in Heat or
Cool mode will adjust only the heat or cool setpoints individually displayed.
Using the Fan Button
FAN ON indicates constant fan operation. FAN ON is not allowed when
the thermostat is in the OFF mode. Pressing the FAN button toggles
this feature. If you don’t see FAN ON, the fan is in auto mode and will
only turn on during a heat or cool demand. The fan is forced into auto
mode when running the program and the thermostat shows unoccupied.
Using the Override Button
Unoccupied Operation —During
programmed, unoccupied
periods, pressing the OVERRIDE button will force the thermostat into Occupied
1 setting for 30 minutes. Each press of the OVERRIDE button will add another
30 minutes of time for up to 4 hours. If the maximum time has been set,
the next press of the OVERRIDE button will reset the timer and return the
thermostat to the correct time period program for the day
Occupied Operation—During programmed, occupied periods, pressing the
OVERRIDE button will force the thermostat into an unoccupied period for the
rest of the day. During this forced unoccupied period, the OVERRIDE button
will operate as described above.
NOTE: Override may only be
used when the thermostat is
set to PROGRAM ON.
