background image

8-EN

Insert the speaker plugs to SPEAKER OUT(L and R) 
sockets.
-

 

The plug of right speaker to R.

-

 

The plug of left speaker to L.

Connect to Headphone

Plug a headphone into the   socket.
 

Connect power

Caution:
-  Risk of product damage! Ensure that the power  
 

supply voltage corresponds to the voltage printed  

 

on the back or the underside.  

-  Before connecting the AC power cord, ensure you  
 

have completed all other connections.

Connect the AC power cord to:
-  the AC~ socket on this unit.
-  the wall socket.

Install remote control batteries

The  provided  Remote  Control  allows  the  unit  to  be 
operated from a distance. 
When operating the Remote Control, point it towards 
the remote sensor on the front panel of the unit.

  Even if the Remote Control is operated within the  

 

effective range (5m), remote control operation may  

 

be impossible if there are any obstacles between  

 

the unit and the remote control. 

  If the Remote Control is operated near other  

      products which generate infrared rays, or if other  
 

remote control devices using infrared rays are used  

 

near the unit, it may operate incorrectly. Conversely,  

 

the other products may operate incorrectly. 

Battery Installation 

1

  Remove the battery compartment cover. 

2

  Insert two “AAA” (R03 or UM-4) dry batteries. 

 

Make sure that the batteries are inserted with their  

 

positive “

” and negative “

” polespositioned  

 

correctly.  

3

  Close the cover. 

Precautions concerning batteries

  Be sure to insert the batteries with correct positive  

 

” and negative “

” polarities.

  Use batteries of the same type. Never use different  

 

types of batteries together.

  Either rechargeable or non-rechargeable batteries  

 

can be used. Refer to the precautions on their labels.

  When the Remote Control is not to be used for a  

 

long time (more than a month), remove the battery  

 

from the Remote Control to prevent it from leaking.

  If the batteries leak, wipe away the leakage inside  

 

the battery compartment and replace the batteries  

 

with new ones.

  Do not use any batteries other than those specified.  

 

Do not mix new batteries with old ones.

  Do not heat or disassemble batteries. 

 

Never throw them in fire or water.

  Do not carry or store batteries with other metallic  

 

objects. Doing so could cause batteries to short  

 

circuit, leak or explode.

  Never recharge a battery unless it is confirmed to  

 

be a rechargeable type. 

 

Summary of Contents for H-200MDi


















Reviews: