
5
ENGLISH
PORTRAIT-412 User manual
protected from moisture and rain and can not be used near water; for example near a
bathtub, a kitchen sink, a swimming pool, etc.
2) Condensation
To avoid condensation to be formed inside, allow this unit to adapt to the surrounding
temperatures when bringing it into a warm room after transport. Condense sometimes
prevents the unit from working at full performance or may even cause damages.
3) Heat
The apparatus should be located away from heat sources such as radiators, stoves or
other appliances that produce heat. This product is not designed for permanent oper-
ation. Consistent operation breaks will ensure that the device will serve you for a long
time without defects.
4) Ventilation
Do not block areas of ventilation opening. Failure to do could result in fire. Always
install according to the manufacturer’s instructions.
5) Power Cord and Plug
Protect power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus. Do not defeat the safety
purpose of the polarized or grounding-type plug. A polarized plug has two poles; a
grounding-type plug has two poles and a third grounding terminal. The third prong is
provided for your safety. If the provided plug does not fit into your outlet, refer to an
electrician for replacement..
6) Electrical Connection
Always disconnect from the power source before servicing. Cut off power before
moving, repairing and cleaning the unit. Improper electrical wiring may invalidate the
product warranty.
To avoid electric shock, all fixtures must be connected to circuits with a suitable ground.
7) DMX connection
When use DMX controller, please make sure that there is no interference sources (e.g.
intercom, high frequency radio waves and radiation source).
8) Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.
9) Servicing
Do not implement any servicing other than those means described in the manual. Refer
all servicing to qualified service personnel only. The internal components of the equip
-
ment must be purchased from the manufacturer Only use accessories/attachments or
parts recommended by the manufacturer.