26
ENGLISH
PORTRAIT-412 User manual
To replace the battery follow the steps below:
1.
Remove the four screws shown in the following picture
Remove these two screws
Remove these two screws
Pull out the rear panel
2.
Pull out the panel on fixture bottom.
3.
You can now access to battery pack.
4.
It the battery connector of the new pack does not correspond to the old one, you
need to cut it our and solder the poles to the original wires. Pay attention to polar
-
ity: red wire is positive; black wire is negative.
WARINING: We suggest you to contact a SOUNDSATION authorized service
center.
10.4. Battery Safety and Disposal Instructions
Please follow the instructions below for safe handling of and proper disposal of us
-
er-serviceable batteries.
Please make sure the battery will be disposed of properly according to your local law
when it runs out of its life, so that to protect the environment. Some batteries may be
recycled, and may be accepted for disposal at your local recycling center.
Please contact SOUNDSATION Customer Support if you have questions about proper
handling of batteries. Batteries may present a risk of fire, explosion, or chemical burn if
mistreated.
f
Do not disassemble, puncture, modify, drop, throw, or cause other unnecessary
shocks to batteries.
f
Do not dispose of batteries in a fire or trash incinerator, or leave batteries in hot
places such as a automobile under direct sunlight.