background image

IMPORTANT SAFETY SYMBOLS

The symbol is used to indicate that some hazardous live terminals are 

involved within this apparatus, even under the normal operating con-

ditions, which may be sufficient to constitute the risk of electric shock 

or death.
The symbol is used in the service documentation to indicate that spe-

cific component shall be replaced only by the component specified in 

that documentation for safety reasons.

Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
Denotes the apparatus is turned on
Denotes the apparatus is turned off

WARNING:

Describes precautions that should be observed to prevent the danger 

of injury or death to the operator.

CAUTION:

Describes precautions that should be observed to prevent danger of 

the apparatus.
To protect the environment, please try to recycle the packing material 

as much as possible
Don’t throw this product away just as general trash, please deal with 

the product follow the abandon electronic product regulation in your 

country.

TAKING CARE OF YOUR PRODUCT

 

f

Read these instructions

 

f

Keep these instructions

 

f

Follow all instructions

Water / Moisture

The apparatus should be protected from moisture and rain and can not be used near 

water; for example near a bathtub, a kitchen sink, a swimming pool, etc.

Heat

The apparatus should be located away from heat sources such as radiators, stoves or 

4

ENGLISH

PAR-18-18W-IP65 User manual

Summary of Contents for PAR-18-18W-IP65

















Reviews: