54--57
Magenta
58--61
Magenta, UV
62--66
UV
67--70
UV, CTO
71--75
CTO
76--79
CTO, yellow green
80--83
Yellow green
84--88
Yellow green, brown yellow
89--92
Brown yellow
93--97
Brown yellow, cyan
98--101
Cyan
102--106 Cyan, amaranth
107--110 Amaranth
111--114 Amaranth, light bluish violet
115--119 Light bluish violet
120--123 Light bluish violet, CTB
124--127 CTB
128--189 Clockwise rotate, from
fast to slow
190--193 Stop
194--255 Anti-clockwise rotate,
from slow to fast
CH2
Strobe
0--7
No brightness
8--15
Open
16--200
From slow to fast,
201--255 Open
CH3
Dimmer
0--255
From dark to bright
19
4
l
Protection against electrical shock
Connection must be made to a power supply system
fitted with efficient earthling (Class I appliance
according to standard EN 60598-1).
It is, moreover, recommended to protect the supply
lines of the projectors from indirect contact and / or
shorting to earth by using appropriately sized residual
current devices.
l
Connection to mains supply
Connection to the electricity mains must be carried out
by a qualified electrical installer.
Check that the mains frequency and voltage correspond
to those for which the projector is designed as given on
the electrical date label.
This label also gives the input power to which you need
to refer to evaluate the maximum number of fittings to
connect to the electricity line, in order to avoid
overloading.
l
Lamp
The fitting mounts a high-pressure lamp that needs an
external igniter is fitted onto the apparatus.
-Carefully read the “operating instruction” provided by
the lamp manufacturer.
-Immediately replace the lamp if damaged or deformed
by heat.
