14
ENGLISH
JUKEY-61 User manual
The sustain effect, when activated, adds a slow and natural decay to the sound and
makes the sound effect of some sounds more intense. It is also possible to use the
sustain pedal (optional) to activate the sustain effect.
To turn off the Sustain effect, press the [SUSTAIN] button
again as shown in the picture to the right
The display will temporarily show OFF as shown in the
picture on the right to indicate that the Sustain effect has
been deactivated. After about 3 seconds, the main screen
relating to the TEMPO value will be displayed.
8.2. Vibrato
To activate the Vibrato effect, press the [VIBRATO] button
as shown in the picture on the right
The display will temporarily show
Uib
as shown in the
picture on the right to indicate that the VIBRATO effect has
been activated. The vibrato effect adds a modulation effect
to the current sound. After about 3 seconds, the main scre-
en relating to the TEMPO value will be displayed
To turn off the Vibrato effect, press the [VIBRATO] button again.
The display temporarily shows
OFF
to indicate that the Vibrato effect has been di
-
sabled. After about 3 seconds, the main screen relating to the TEMPO value will be
displayed.
8.3. Tempo
The default Tempo value is 120 however, this can be changed by using the [TEMPO -]
or [TEMPO +] buttons. Press and hold the [TEMPO -] or [TEMPO +] buttons to quickly
change the Tempo. If the [TEMPO -] and [TEMPO +] buttons are pressed simultaneous-
ly, the default Tempo setting is restored. The range of values for the Time is from 30 to
240.
TEMPO
+
-
The display shows the current Tempo value
