GND
REM
+12V
POWER
INPUT
RMD
Installation of the amplifier should be done in the following steps:
1. Ensure that the ground is appropriate, then connect it to the amplifier.
2. Next step is to connect the +12V wire. Ensure all power terminals are used.
This cable has to be fused at the battery for safety precautions.
3. The final step is connecting the switched remote.
CAUTION
+12V(B+), GND, REM
4
GND (GROUND CONNECTION)
For connection to chassis ground. For optimum performance, 0 gauge cable is recommended.
REM (REMOTE)
Connect to sw12V from the head unit.
+12V / B+ (POWER CONNECTION)
For connection to positive terminal of battery (+12).
For optimum performance, 0 gauge cable is recommended.
FND Volt Meter Port
Before attempting to make any connections to power supply, input and output connectors,
make sure the amplifier is in OFF state. Check polarity of cables carefully as using reversed
polarity will cause damage to amplifier. And to prevent power loss and overheating of wiring,
always use the recommended wire gauges.
CAUTION
(SP-6K DFR / SP-8K DFR / SP-12K DFR)
Summary of Contents for SP-6K DFR
Page 8: ...MADE IN KOREA ...
