nFUSE™ LED Lightbar
nFUSE Lightbar English 0520
15.
PHOTO SENSOR OVER-RIDE CONFIGURATION INSTRUCTIONS (CONT.)
2. Click on the input wire/siren control to be used to over-ride the functions activated by the photo sensor and change the priority of the selected input wire/siren
control to be a higher priority than the photo sensor control priority. Set the functions activated by the photo sensor to ‘Turn Function OFF’ (Red button) when the
input wire/siren control is active.
3. From the example in #2, when +V is applied to the gray wire, Low Power 1 will be turned off even if the photo sensor is active since the gray wire control is a
higher priority than the photo sensor control.
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/tech-services/returns/
.
If you have questions regarding this product, contact
Technical Services
, Monday - Friday, 8 a.m. to 5 p.m. ET at
1.800.338.7337
(press #4).
Questions or comments that do not require immediate attention may be emailed to
ENHANCING SAFETY THROUGH INNOVATION
