background image

IMPORTANT INFORMATION: 

Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance. 

To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at 

www.soundoffsignal.com/sales-support

.

If you have questions regarding this product, contact 

Technical Services

, Monday - Friday, 8 a.m. to 5 p.m. at 

1.800338.7337

 (press #4 to skip the automated message).

Questions or comments that do not require immediate attention may be emailed to

 [email protected]

.

SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.

Effective sirens generate loud sound 

pressure levels that can potentially 

cause hearing damage. Installers and 

those around the vehicle need to be 

aware of the dangers and wear hearing 

protection whenever the siren system 

is operating. Vehicle operators and 

occupants should assess their exposure 

to siren noise and determine what steps 

need to be taken to prevent hearing 

damage.

The siren system is intended for use 

by authorized personnel only. It is the 

user’s responsibility to ensure they 

understand and operate the emergency 

warning devices in compliance with 

all applicable city, state, and federal 

laws and regulations.  SoundOff 

Signal assumes no liability for any 

loss resulting from the use of the siren 

system.

Package Contents:

1 ea.  Amplifier

1 ea.  Instruction Manual

1 ea.  Operators Warning Card to 

remain in vehicle for operator 

review

1 ea.  Sound Pressure Warning Label 

that is to be attached in vehicle 

and  in plain site of operator and 

occupants of the vehicle

1 ea.  3 Switch panel with:

 

  1-ON/OFF/ON Switch

 

  2-OFF/MOMENTARY Switch

1 ea.   Electrical Isolation Hardware Kit

Wire capacity requirements for siren 

amplifier (incoming power + ground)

0-10 Feet: 

14 AWG

10-20 Feet:  12 AWG

20-30 Feet:  10 AWG

30+ Feet: 

Consult Factory to 

determine requirements

Please see reverse for 
Technical Specifications

ETSA2ØØR  5.13

Important Information:

• Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. 
These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these 
devices to ensure compliance.

!

WARNING

Sirens produce loud sounds that

may damage hearing:

- Roll up windows.

- Wear hearing protection.

- Use only for emergency response.

- Avoid exposure to siren sound

  outside of vehicle.

IMPORTANT NOTICE TO 

INSTALLER:

Make sure to read and understand 

all instructions and warnings before 

proceeding with the installation of this 

product.  Ensure the manual and all 

warning cards are delivered to the end 

user of this equipment.

Introduction

The ETSA2ØØR is a Compact Siren 

Amplifier designed for single 100 Watt 

speaker or dual 58 Watt use.

The primary operating modes are User 

Selectable Tone, Yelp, Wail, Piercer, 

Hi-Lo, Super Hi-Lo, Radio, PA, Horn 

Override, and a Manual Override are 

available in all modes.

Sirens provide an essential function 

of an effective audio / visual warning 

system. However, sirens are only short 

range secondary devices. The use of 

a siren does not insure that all drivers 

can or will abide by or react to an 

emergency warning signal, especially at 

high rates of speeds or long distances. 

The operator of the vehicle must never 

take the right of way for granted and 

it is the operator’s responsibility to 

proceed safely.

The effectiveness of this siren system 

is highly dependant on the correct 

mounting and wiring. The installer must 

read and follow the manufacturer’s 

installation instructions and warnings in 

the manual. The vehicle operator should 

verify the siren system is securely 

fastened to the vehicle and properly 

functioning.

ETSA2ØØR

Summary of Contents for 200 Series






Reviews: