SoundMax SM-DVBT280, Instruction Manual

Page: 9 / 36

Operation
8
Operation
SUBTITLE
Click this button to select subtitle language,
if this choice is supported by the current
channel.
TV/RADIO
Press this button to switch between TV and
radio.
RE CALL
Click this button to select the last-viewed
channel.
PREV/NEXT
When playing a media file, press these
buttons to select previous/next file.
STOP
When playing a media file, press this button
to stop playback.
OSD operation
Program
8
• OSD Language: select the language of the
system menu.
• Country: select your country.
• FTA Only : searching free-to-air
channels only .
• Search Mode: DVB-T2 or DVB-C.
•
Antenna Power
: select to enable an
external active antenna (if installed) .
• Channel Search: press OK to start
automatic channel search.
1. Press MENU button to enter the setting
menu displayed on the screen.
2. Press LEFT/RIGHT cursor buttons on the
RC to select setting page.
3. Press OK button on the RC to go to the
parameter list.
4. Press UP/DOWN cursor buttons on the
RC to select a parameter to adjust.
5. Press LEFT/RIGHT cursor buttons on the
RC to adjust the selected parameter.
6. Press MENU button to return to the
previous menu page. Press EXIT button on the
RC to quit the menu.
Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.
Installation
When you start the unit for the first time, or
after resetting it to factory defaults, you will see
the Installation menu on the screen.
• Channel Edit : Access the
channel editor menu.
You can edit the channel list using the following
functions: favourite, move, skip, lock, delete.
Favorite: Select the program you want to
add to your list of favorites and press the FAV
button.
Move: Select the program you want to move,
press the button 2 and then OK, press UP/DOWN
to move it. Press the button 2 to again confirm
and exit
.
Skip: Select the program you want to skip and
press the button 3 and then OK to skip it. Press 3
to again confirm and exit.
Lock: Select a program and press the
button 4 ; enter the password (000000 by default)
and press the button 4 and then OK to lock it .
Press 4 to again confirm and exit.