SoundMax SM-DVBT280, Instruction Manual

Page: 5 / 36

Connection
Connection
Connection
Antenna input
•
Connect an external DVB-T/T2 antenna
(cable) connector to the antenna input RF IN.
The signal in the block cable antenna
can fail to contain DVB-T/T2 signal due to the
carrier frequency altered by the cable network
operator.
In order to receive digital air TV signal
use an indoor or outdoor UHF antenna.
Specify the possibility and quality of digital air
signal with your local digital TV service
providers. The absence of a stable TV signal in
your area can-not be a reason for returns or
refunds without an additional test of TV signal
reception in your area.
To increase the reception quality of the
state digital air television in rural areas or at
significant distances from a broadcasting
center we recommend using individual active
outdoor UHF antenna with a high resistance
factor, and placing them at maximum possible
heights.
Power adaptor input
•
Connect the DC power adaptor to this
input and plug it into the electrical outlet.
HDMI-out
•
If your TV has an HDMI video input,
connect it to an HDMI output of this unit using
an HDMI cable (included).
4
Stereo audio output
• Connect the left (white) and right (red)
terminals of the stereo audio output to the
corresponding audio inputs on your TV using
4
an RCA cable.
Video output
• Connect the yellow composite
video output to the composite video input on
your TV using an RCA cable.