SoundMax SM-CCR3036, Instruction Manual

Page: 5 / 41

5
Installation/connection
General notes
Choose the mounting location where the unit will not interfere with the normal driving function of the
driver.
Before finally installing the unit, connect the wiring and make sure that the unit works properly.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the
vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or
from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.
DIN front-mount (Method A)
Install the sleeve into the dashboard; ensure it is installed with the
correct side and there are no obstacles (wires, dashboard
elements, etc) for the unit installation.
After installing the sleeve into the dashboard, bend tabs fitting to
the size of the dashboard to fix the sleeve in place.
Make the necessary wire connections. Ensure the connections are
correct.
Install the unit into the sleeve until the side locks are fixed.
1. Dash board
2. Sleeve tab to bend