SoundMax SM-2402, Instruction Manual

Page: 8 / 17

8
• After a maximum of 20 songs (or less) have been selected as described above, press the
CD PLAY/ PAUSE button to start playing the programmed tracks.
• The program memory will be cleared when you press CD STOP button or turn off the CD or power supply.
Note: In case of MP3 Disc all procedure is same as normal disc. If you have directory in your disc, you have to
select directory and track both. You can program up to 10 songs with above method.
Note: Good quality sound is guaranteed only when playing licensed CD-R/CD-RW discs.
MP3 operations
• In MP3 playback mode all functions are available as in CD operation mode.
• If your MP3-CD has folders, you can select the folder to playback. Press FOLDER UP or FOLDER DOWN key
to switch to the next or previous folder. The set will start playing the first song in the selected folder.
Note: Good quality sound is guaranteed only when playing licensed MP3 discs.
Maintenance and care
• Check your batteries regularly, old or discharged batteries should be replaced. If the
unit is not going to be used for some time or is being run exclusively on the alternative
power, remove the batteries to avoid leakage and damage.
• Electronic products of this kind should never be subjected to moisture or extreme
temperatures.
• If necessary, clean the unit with a piece of cloth dampened with water only (be sure the AC
power cord is disconnected from the power supply).
• The heads and capstan are in constant contact with the moving tape. Use a small cotton bud
with alcohol or special tape head cleaner to clean these parts. Never touch the heads with
anything metallic.
CD protection
• When pick up the CD disc, always hold the edge of the disc, never touch the surface of the
disc, it would scratch the disc surface and may occur sound distortion or raise reading
problem.