SoundMax MS-MSD10, Instruction Manual

Page: 15 / 42

15
Audio setup
SPEAKER SETUP: Downmix
LT/RT: The audio out is Left and Right channels format even if the original sound is
5.1CH format.
Stereo: The audio out format is stereo even if the original sound is 5.1CH format.
SPDIF SETUP: Spdif output
SPDIF off: no digital signal out (optical or coaxial output off), only analog audio
output.
SPDIF/RAW: no decoding on the amplifier digital signal input.
SPDIF/PCM: the amplifier must be supported by PCM decoding or Dolby digital
decoding function.
Karaoke setup
You can switch the microphone on or off, adjust the microphone threshold, microphone volume and echo.
Dolby setup
DUAL MONO
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average signal.
DYNAMIC
If watching large dynamic scope movie program at night, by selecting this mode you
can reduce the volume to a very low level and at the same time keep the fine details
sounds. In this case, this doesn’t disturb the family and keep the quality sound.
Video setup
COMPONENT
S-Video: set to this item when connecting to S-Video terminals.
YUV: set video output in analog component video format when connecting to Y/U/V
terminals.
RGB: set video output in Red/Green/Blue format when connecting to SCART
terminals.
TV MODE
You can choose between progressive (P-Scan) and interlaced output when playing
with “YUV” mode.
SHARPNESS, BRIGHTNESS, CONTRAST