INTIAL SCAN
When this unit is switched on for the first time at
TUNER
mode, then press
FUNCTION
button switching to
DAB
, the scanning display will be shown while the scanning process
takes place:
The radio scans all usable stations (full scan) and stores them alphanumerically -1
Radio, 2
Radio, AA Radio, AB Radio
…The initial scan will take a few minutes. After the scan, the
clock
will be set and the radio will play the name of the first station in the sequence. To browse
for
another station, refer to the next section.
BROWSING FOR A STATION
To browse for another DAB station from the top panel controls:
· Press the
TUNE UP/ TUNE DN
button.
<Station list> will be displayed.
ADJUSTING THE VOLUME
To adjust the volume from the top panel controls:
Press the
VOLUME
+/- button to increase or decrease the volume level.
CLOCK SET
SET TIME/DATE
: This main option enables the clock to be set manually if these is no
available
DAB transmission.
To set the time and data manually:
•
When unit during Standby mode
, press
MENU
button to enter Set Clock.
• Set the clock mode 12/ 24 Hour, press the
TUNE UP/DN
button to choose 12 or 24 time
format then press
SELECT
button again to next setting.
• Set Hour, press the
TUNE UP/DN
button to set the hour, then press
SELECT
button to
confirm.
• Set Min, press the
TUNE UP/DN
button to set the minute, then press
SELECT
button
again to confirm.
