SOUNDMASTER URD-800, Instructions Manual

Page: 5 / 6

5
Note:
y
To ensure good system performance; wait until the disc tray completely reads the disc before
proceeding.
y
If no disc loaded into the compartment, or the disc is placed upside down, the display will show
00.
PLAYING A COMPACT DISC
1. Press PLAY/PAUSE button to start playback.
The playback starts from track 1, the track number will flash on and off on the display.
To interrupt playback, press PLAY/PAUSE button.
To resume playback, press PLAY/PAUSE button again.
2. To stop playback, press STOP/CLOCK ADJ. button, The display will show all the tracks on
the disc.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
y
Press SKIP UP/DOWN button repeatedly in stop mode or during playing until the desired
track appears on the display.
y
Press PLAY/PAUSE button to start play.
To search for a particular passage during playback
( track scanning at high speed)
Press and hold SKIP UP/DOWN button to scan the current playing track at high speed until
desired point (passage), then release the button, playback will start again from this point.
PROGRAM TRACKS
Program tracks of disc are possible when playback is stopped. Up to 20 tracks can be stored in
the memory in any order.
1. In stop mode, press PROGRAM button to enter program setting, the “ PROG ” will flash and
the P01 will show on the display.
2. Press SKIP UP button to select the first desired track to be programmed.
3. Press PROGRAM button to enter. The display changes to show
P02 .
4. Repeat steps 2 & 3 to store other desired tracks until all tracks programmed.
5. Press PLAY/PAUSE button to start playback in the order you programmed.
6. Press STOP button to stop program playback.
To Erase the Memory (Program)
To clear the memory (program), you may have two ways:
1. Press STOP/CLOCK ADJ. button when the disc stopped, or
2. Open the CD compartment lid, program will be erased.
REPEAT PLAY
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1. Press CD REPEAT/RANDOM BUTTON once in play, The “ REP ” will flash on and off. The
current track will be played over and over again till you press STOP/CLOCK ADJ. button.
2. To cancel repeat play, press REPEAT button twice again. The “ REP ” goes off.