ENGLISH
ENG 6
Setting the alarm
• You can set a time to wake up at which the device will come on either in the radio or CD mode. Or you can be
awakened by an alarm signal. You can save two wake-up times in total.
• Press the
ALARM1
(15) or the
ALARM2
(14) button. The time digits will blink in the display.
• Set the wake up time with the
/MINUTE
(12) and
/HOUR
(11) buttons and confirm it by pressing either the
ALARM1
or
ALARM2
button.
• The LED indicator
AL.1
(J) or
AL.2
(I) will light up. If you have saved 2 wake up times, both LED indicators will
come on.
• Set the desired volume by turning the volume control (23) on the device.
• Set the
FUNCTION
switch (22) to
CD
, if you would like to be awakened by music from a CD. Make sure that
there is a CD in the CD compartment (1).
• Set the
FUNCTION
switch to
AM
or
FM
, if you would like to be awakened by the radio. Select the desired radio
station by means of the
TUNING
control (27).
• Set the
FUNCTION
switch to
BUZZER/AUX IN
in order to be awakened by an alarm signal.
• If the device is switched on by the wake up function, the particular LED indicator
AL.1
or
AL.2
will blink in the
display. To switch off the alarm, press on the relevant
ALARM1
or
ALARM2
button or press on the
ON/ OFF
button (17).
• Delete the wake up time by pressing once on the
ALARM1
or
ALARM2
button. The LED indicator
AL.1
or
AL.2
will go out.
Repeat alarm (SNOOZE)
• If the device is switched on by the wake up function, it can be switched off temporarily by means of the
SNOOZE
button (2). The LED indicator
SNOOZE
(E) will come on.
• The device will be switched on again after approx. 5 minutes.
Programmed switch-off (SLEEP)
• To fall asleep with music, a time of 90, 60, 30 or 15 minutes can be set. After the time has elapsed, the device
will automatically switch off.
• Press the
SLEEP
button (4) several times to determine the switch-off time. The LED indicator
SLEEP
(H) will
come on in the display.
• To deactivate the sleep function, press the
SLEEP
button as often as it takes until the LED indicator
SLEEP
goes out.
CD
• Slide the
FUNCTION
switch (22) on the device to
CD
.
• Open the CD tray (1) by pressing on the
OPEN/CLOSE
CD tray lock (3). The lid of the CD tray will open
upwards. Never use force to open the CD tray.
• Remove the shipping safety lock, when you open the CD tray for the first time.
• Insert a CD into the tray, so that the printed side is facing upward. Press on a point in the cemtre of the CD until
it locks into place on the axis.
• Press the CD tray lid down to shut the CD tray. The CD will now be read.
• Before reopening the CD tray, always make sure that the CD is no longer rotating. Always press on the button
■
(13) first to end the rotation of the CD.
• To remove the CD, place one finger on the centre of the CD (the middle of the spindle) and another finger on
the edge of the disc. Pull the CD out carefully.
