UR8350WE /
English Instruction Manual
2
BASIC OPERATION
Press the “STANDBY” button to turn the unit on or off.
Press the “VOL + / -“ to increase or decrease the volume.
DAB MODE
For the best reception extend the telescopic antenna complete. If you start the DAB-mode the
first time the unit will automatically search the stations which can be received.
Press the “MODE” button to select the DAB radio mode.
Auto search
Press the “SCAN” button, “Autotune Full Scan” will show on the display. The number of the of
the DAB stations will be shown on the upper right corner and the unit will automatically play
the first station. Press “TUNE / ” to choose the next or previous station.
Manual search
1.
During DAB mode, press and hold the “ENTER” button to select the manual tune. Press
“TUNE / ” to manual tune the DAB channels.
2.
After setting press “ENTER” to confirm.
3.
Return to the main manual, “MAN” will be shown on the right top corner. Press “ENTER” to
confirm. “DAB” will be shown on the right top corner.
4. Then you can repeat from step 1 to set the other manual tune channels.
Preset DAB radio stations
1. Choose the desired DAB radio station.
2.
Press and hold the “PRESET” button. “Preset Empty 1”will appear in the display, “1” is
flashing in the display.
3. Press
“TUNE / ” to choose the desired station number (1-10). Then press the
“ENTER” button to store it.
4. Repeat the same procedures until all desired radio stations are stored.
Recall the saved radio stations
1.
Press the “PRESET” button and then the “TUNE / ” button to select the desired
radio.
2.
Press the “ENTER” button to confirm.
Information display
The unit has DAB information modes which are shown on the bottom line of the display. Press
the “INFO” button to see the available types:
Ensemble Frequency
Signal strength
Audio Bit Rate
Time/Date
Ensemble name
DLS (Dynamic Label Segment)
FM MODE
1. Press the
“MODE” button to select FM radio mode.
2.
Press the “SCAN” button to start the search. When a radio station is found, the frequency
on the display will stop running and start playback automatically.
If reception is not good, press the “TUNE / ” for fine tuning.
Switch between stereo and mono
During the FM radio mode press the “ENTER” button to select the audio mode “Auto” or “mono”.
To store preset stations is the same as in DAB mode!