UR6700
/ English Instruction Manual
5
the set volume level. The corresponding alarm icon will flash on the display.
TURNING OFF THE ALARM SETTINGS
1.
Press the
“
ALARM
” button to select between Alarm 1 and Alarm 2 and then press the
“
SELECT
” button to confirm the selection.
2.
Select with
“ ” or “ ” button the alarm setting “OFF” and then press the “
SELECT
” button
to confirm the selection.
When the alarm setting is deactivated (OFF), the corresponding alarm icon (1 or 2) turns off on
the display.
DEACTIVATING THE SOUNDING ALARM
Press the
“
POWER / SOURCE / ALARM OFF
” button to deactivate a sounding alarm.
SNOOZE
●
To temporarily stop a sounding alarm, press the
“
SNOOZE / SLEEP / DIMMER
” button.
The snooze period is 9 minutes.
●
The radio will return to standby mode during the snooze period. The alarm will sound again
when the snooze period is over.
●
To cancel the snooze period and the alarm, press
“
POWER / SOURCE / ALARM OFF
”.
SLEEP
This function defines the duration of time before the radio switches itself off automatically.
When the radio is turned on, press the “
SNOOZE / SLEEP / DIMMER
” button repeatedly to
select a sleep period (Options: Off, 5, 15, 30, 60 and 90 minutes).
Once a sleep period is set, the sleep icon will show on the display. The radio will automatically
switch off when the sleep period is over.
DIMMER
In standby mode, press the
“
SNOOZE / SLEEP / DIMMER
” button to adjust the brightness (5
levels) of the display.
SYSTEM MENU
USING THE SYSTEM MENU
●
To cycle through the options in a menu, press the
“ ” or “ ” button.
●
To confirm a selection, press the
“
SELECT
” button.
●
To adjust a value (e.g. hour time), press the
“ ” or “ ” button to select a value and
then press the
“
SELECT
” button.
●
To go back to the previous menu/screen, press the
“
MENU / INFO / BACK
” button.
ACCESSING THE SYSTEM MENU
1.
In DAB or FM mode, p
ress and hold the “
MENU / INFO / BACK
” button to enter the menu.
2.
Press the
“ ” or “ ” button to cycle through the options until you see “System” and confirm
with “
SELECT
”.
3.
Press the
“ ” or “ ” button to cycle through the below options:
