background image

 

 

 

 

 

 
 
 
 
 
 
 

This symbol indicates the presence of dangerous 
voltage inside the enclosure, sufficient enough to 
cause electric shock. 
 
This symbol indicates the presence of important 
operating and maintenance instructions for the 
device. 
 

 

Safety, Environmental and Setup Instructions 

 

Use the device in dry indoor environments only. 

 

Protect the device from humidity. 

 

Do not open the device. 

RISK OF ELECTRIC SHOCK!

  Refer opening and servicing to qualified personnel. 

 

Connect  this  device  to  a  properly  installed  and  earthed  wall  outlet  only.  Make  sure  the  mains  voltage  corresponds  with  the 
specifications on the rating plate. 

 

Make sure the mains cable stays dry during operation. Do not pinch or damage the mains cable in any way. 

 

Disconnect device warning: Main plug is used as the connection, so it should always remain ready operate. 

 

The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.  

 

A damaged mains cable or plug must immediately be replaced by an authorized service center.  

 

In case of lightning, immediately disconnect the device from the mains supply. 

 

Children should be supervised by parents when using the device. 

 

Clean the device with a dry cloth only. 
Do NOT use CLEANING AGENTS or ABRASIVE CLOTHS! 

 

Do not expose the device to direct sunlight or other heat sources. 

 

Install the device at a location with sufficient ventilation in order to prevent heat accumulation. 

 

Do not cover the ventilation openings! 

 

The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.  

 

It  shall  be  not  be  exposed  to  dripping  or  splashing  and  that  no  objects  filled  with  liquids,  such  as  vases,  shall  be  placed  on  the 

apparatus.  

 

The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibrations or placed in dusty environment. 

 

Never attempt to insert wires, pins or other such objects into the vents or opening of the unit. 

 

Install the device at a safe and vibration-free location. 

 

No naked flame sources, such as lighted candles, should be placed on the apparatus.  

 

Install the device as far away as possible from computers and microwave units; otherwise radio reception may be disturbed. 

 

Do not open or repair the enclosure. It is not safe to do so and will void your warranty. Repairs only by authorized service/ customer 
center. 

 

The device is equipped with a “Class 1 Laser”. Avoid exposure to the laser beam as this could cause eye injuries. 

 

Only use mercury and cadmium-free batteries. 

 

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.  

 

Used batteries are hazardous waste and NOT to be disposed of with the household waste!!! Return the batteries to your dealer or to 
collection points in your community. 

 

Keep batteries away from children. Children might swallow batteries. Contact a physician immediately if a battery was swallowed. 

 

Check your batteries regularly to avoid battery leakage. 
 

 
 

CAUTION - INVISIBLE LASER RADIATION WHEN OPENING THE COVER OR 
PRESSING THE SAFETY INTERLOCK. AVOID EXPOSURE TO THE LASER BEAM.

 

ENVIRONMENTAL PROTECTION

 

Do not dispose of this product with the normal household waste at the end 
of its life cycle. Return it to a collection point for the recycling of electrical 
and  electronic  devices.  This  is  indicated  by  the  symbol  on  the  product, 
user manual or packaging.

 

The materials are reusable according to their markings. By reusing, recycling or 
other  forms  of  utilization  of  old  devices  you  make  an  important  contribution  to 
the protection of our environment.

 

Please contact your local authorities for details about collection points.

 

WARNING

 

Risk of electric shock 

Do not open!

 

Caution: To reduce the risk of electric shock, do not remove the cover (or back). There 

are no user serviceable parts inside. Refer servicing to qualified

 

service

 

personnel.

 

Used batteries are hazardous waste and NOT to be disposed 
of with the household waste!

 As a consumer you are 

legally 

obligated 

to return

 all batteries 

for environmentally responsible 

recycling – no matter whether or not the batteries contain harmful 
substances*).

 

 

Return batteries free of charge to public collection points in your 
community or to shops selling batteries of the respective kind.

 

 

Only return fully discharged batteries. 
 
*) marked Cd = cadmium, Hg = mercury, Pb = lead 
 
 

Summary of Contents for UR2170v2
















Reviews: