UR106 / English Instruction Manual
1
LOCATIONS OF CONTROLS
1
MEM/M+ / SET button
2
BACKWARD button
3
FORWARD button
4
SNOOZE button / SLEEP button /
DIMMER button / DISPLAY ON/OFF
button
5
ALARM 1 button / VOL DOWN button /
ALARM OFF button
6
ALARM 2 button / VOL UP button /
ALARM OFF button
7
button / ALARM OFF button
8
Display
9
Alarm 1 indicator (Buzzer)
10
Alarm 1 indicator (Radio)
11 Alarm 2 indicator (Buzzer)
12 Alarm 2 indicator (Radio)
13 Speaker
14 Battery compartment
15 Antenna
16 Power cord
Getting started
Connecting to power
•
Connect the power cord to a wall socket (AC 230V ~ 50Hz).
•
The radio is powered and in standby mode when you see the display is switched on.
Backup system
•
The radio is equipped with a backup system. It requires a 3 V lithium battery (type: CR2032
not included). Insert the battery into the battery compartment and make sure the positive and
negative (+ or -) sides of the battery are in contact with the corresponding terminals in the
battery compartment.
•
If a power cut occurs, the radio automatically switches to the battery power supply and
keeps the clock and timer settings.
•
To open the battery compartment, use a screwdriver to detach the screw on the
compartment door.
•
When replacing the battery, do not disconnect the power adapter. Otherwise, all clock and
alarm settings will be lost.
