8
Inserting and removing a disc
Set the function switch (20) to
CD
. The power
indicator (14) lights up red.
flashes in the LED
display (13) for a short time. If no disc is inserted,
appears on the LED display (ill. ).
Open the disc compartment lid (17) with the disc compartment lock (2).
appears on the LED
display (13). Insert a disc with the cover facing up into the disc compartment (16).
Note:
Flip the carrying handle (18) back, before opening the disc compartment lid (17).
Playing a disc
Close the disc compartment lid (17).
If a supported disc is inserted in the disc compartment (16)
the total number of tracks, e.g. , appears once the disc
has been loaded.
Press
PLAY/PAUSE
(9) to start playback. Playback starts
with the first track (ill. ).
Press
PLAY/PAUSE
(9) to pause playback. The title
number flashes (ill. ).
Press
PLAY/PAUSE
(9) again to resume playback.
Press
STOP
(8) to stop the playback. The total number of
tracks on the disc is displayed.
Searching a track
During playback press
SKIP+
(7) to get to the beginning of the next track. For each press you will
skip one more track forwards.
During playback press
SKIP–
(10) to get to the beginning of the current track. For each press you
will skip one track backwards.
To find a particular position within a track, press and hold
SKIP–
(10) or
SKIP+
(7). Release the
key, when you reach the desired position. Playback will now continue from this position.
In stop mode:
You can also select a certain track in stop mode. Press
SKIP–
(10) or
SKIP+
(7)
to select the desired track.
In stop mode you cannot select a certain position within a track.
Programming tracks
Up to 20 tracks can be programmed in any desired order.
In stop mode press
PROG.
(12). The first storage number
flashes on the LED display (13).
Press
SKIP–
(10) or
SKIP+
(7) to select the desired track
(ill. ).
Press
PROG.
(12) again. The track is stored and the next storage number
is displayed.
Repeat these steps until all desired tracks have been programmed. When the memory is full, the
appliance will count up for 20 seconds and then load the program.
