English - 9
Program Mode
1.
During the CD stop mode, press the PROGRAM BUTTON once. The
Program Indicator “
” and the number of
Program to be memorized starts from the first
program “
” will light up and blink continuously.
Press the FOLDER UP or DOWN BUTTON, then
press CD SKIP/SEARCH FORWARD or BACKWARD
BUTTON to select your desired musical track, CD LCD DISPLAY will show
the track number of this specific Album to be programmed. Press the
PROGRAM BUTTON to store this track in memory.
2.
Repeat above procedure until all desired tracks have been programmed.
Remarks: Whenever the FOLDER UP or DOWN BUTTON is pressed, it
will always show the last programmed Album number first
to recall your memory.
A total of 20 tracks can be stored in memory. After complete
programming, LCD DISPLAY will show “
” and blink
continuously.
3.
To start the Programmed playback, press the CD PLAY/PAUSE BUTTON
once and the CD Play Indicator “
”, “
” and the track number of
the specific Album will light up.
Example: Album # 3, Track # 2.
4.
To check the program you have stored after complete programming,
press the PROGRAM BUTTON once during the CD Stop mode. The LCD
DISPLAY will show “
” and blink continuously. Press the FOLDER UP
or DOWN BUTTON to read the Album number, then press the CD
SKIP/SEARCH FORWARD or BACKWARD BUTTON to read the specific
track number of said Album. Press the PROGRAM BUTTON again, LCD
DISPLAY will show “
” and blink continuously. Repeat above
procedure to check all programs being stored.
5.
To cancel the programmed memory:
¾
During the CD stop mode, press the CD STOP BUTTON once.
OR
¾
Open the CD Door during the CD stop mode.
