English - 6
DISPLAY will show the appropriate track number. Press the PROGRAM
BUTTON to store this track in memory.
2.
Repeat above procedure until all desired tracks have been programmed.
A total of 20 tracks can be stored in memory.
Remarks:
Whenever CD SKIP/SEARCH FORWARD or
BACKWARD BUTTON is pressed, it will always show
the last programmed track first to recall your
memory.
After complete programming, LCD DISPLAY will show “
” and
flash continuously.
3.
Press the CD PLAY/PAUSE BUTTON once to start
the program playback and the CD Play Indicator
“
” will light up.
4.
To check the program you have stored after
complete programming, press the PROGRAM BUTTON once during CD
stop mode, then press the CD SKIP/SEARCH FORWARD BUTTON once,
the LCD DISPLAY will show the first programmed track number. Repeat
above procedure to read all the programmed memory.
5.
To cancel the programmed memory:
¾
During the CD stop mode, press the CD STOP BUTTON once.
OR
¾
Open the CD DOOR during the CD stop mode.
The Program Indicator “
” will disappear from the LCD DISPLAY.
PLAYING MP3 DISC
Getting Started
Note: Should skipping of tracks occur during MP3 Disc playing, try turning
the volume down.
When MP3 disc is playing, do not open the CD DOOR.
1.
Open the CD DOOR by pull up the CD DOOR. Put a MP3 disc into the CD
compartment and close the CD DOOR. Set the FUNCTION SWITCH to
“CD” position.
Note : Ensure the CD DOOR is closed properly and locked in place.
2.
When the CD DOOR is closed with a MP3 disc inside,
total number of the tracks in the disc will be shown
on the CD LCD DISPLAY and go to stop mode.
3.
If there is no disc inside, the DISPLAY will show
“
” and go to stop mode.
4.
If the CD DOOR is not closed, the DISPLAY will
show “
”.
