RCD1750SI / English Instruction Manual
2
Eco power saving mode
•This unit has a built-in power saving control which will automatically switch into STANDBY
mode to reduce power consumption when it detects that the unit is not in use (idle).
• This automatic switching to STANDBY mode will happen approximately 10-15 minutes after
the following circumstances:
CD mode: CD playback has stopped.
.
•To re-activate the unit after it has automatically switched to standby mode, press the
key to switch on the unit.
Playback features:
• Repeat / ALL playback, press MODE key
• Random playback, press MODE key until “RAND” text show on display
Clock
To set the time:
1. Switch the unit to Standby mode press and hold CLK SET key in 2 seconds.
Press TUNE UP + or TUNE DN - to select 12 or 24HR.
Display shows
or
hour on the display.
2. Press CLK SET to confirm.
3. Press TUNE UP + or TUNE DN - to set the hour time.
4. Press CLK.SET to confirm.
5. Press TUNE UP + or TUNE DN - to set the minute time.
6. Press CLK SET then the clock time is now set.
Note:
• When the digital clock is not set, the digital clock display shall continuously flash to indicate
that the correct time has not yet been set.
