NR961
/ English Instruction Manual
3
DAB
1. P
ress the “
FUNCTION
” button repeatedly, or the “
MODE
” button on the remote control to
select the DAB mode.
2. At the first start the unit will automatically start the scan function and search all available
stations.
3.
During the scan the display will show “Scanning ………” together with a slide bar that
indicate the progress of the scan and the number of stations that have been found.
4. After the scan has finished, the unit will select the first alphanumerically found station.
5. To explore the found stations,
rotate the “
TUNE/SKIP/SELECT/SNOOZE
” knob and press
the “
TUNE/SKIP/SELECT/SNOOZE
” knob to confirm the selected station.
6.
You can also select the found station by pressing “
SKIP BACK
” or “
SKIP FORWARD
” and
confirm with the “
ENTER
” button.
Note:
If no stations are found after auto scan,
the unit will enter back into the Tune Select
Menu.
DAB FULL SCAN
The full scan will search for the entire DAB Band III channels. After the scan has finished, the
first alphanumerically found station will be automatically selected.
1.
Press “
SCAN/PLAY/PAUSE
” button to activate full scan or press
and hold the
“
MENU/INFO
” button to enter into the menu.
2. Rotate the
“
TUNE/SKIP/SELECT/SNOOZE
” button to select
“Station Scan” and press the “
TUNE/SKIP/SELECT/SNOOZE
”
button to confirm.
Select “Full Scan” and confirm with “
TUNE/SKIP/SELECT/SNOOZE
”. The
display will show “Scanning ………” together with a slide bar that indicates the progress of
the scan and the number stations that have been found so far.
3. All the stations that have been found will be stored automatically.
DAB MANUAL TUNE
As well as the full scan function, you can manually tune the radio. This can help if you know
your radio has missed stations.
1.
Press and hold the
“
MENU/INFO
” button to enter the menu and
choose with the “
TUNE/SKIP/SELECT/SNOOZE
” knob “Station
Scan
” and press the “
TUNE/SKIP/SELECT/SNOOZE
” knob to
confirm
and choose “Manual Tune” confirm again.
2.
Choose with the “
TUNE/SKIP/SELECT/SNOOZE
” knob the DAB
channel from 5A to 13F.
3. After your desired DAB channel number is selected, press the
“
TUNE/SKIP/SELECT/SNOOZE
” button to enter the current multiplex. Now the display will
show the multiplex and below you will see the signal strength.
4. You will not see any new radio stations or hearing anything while in manual tune. To find the
newly tuned in stations search through the station list.
