DAB60
/ English Instruction Manual
3
You can also store desired radio station directly to preset station buttons “
1
– 3
”. To do this,
select the desired radio station press and hold the corresponding station button pressed until
"Preset # stored" appears on the display.
RECALL STORED RADIO STATIONS
1. To recall a stored station, press the
“
P
”. Choose with “ ” or “ ” the desired station number
and press the “
VOLUME / ENTER
” knob to confirm.
2. If you choose a preset station number that has not been allocated a
station,” Empty” will
displayed.
DAB DISPLAY INFORMATION
Press the “
I/M
” button repeatedly to cycle through the information modes. The information is
displayed on the lower segment of the display.
DAB MENU
The device must be in DAB mode. Enter the
DAB menu by press and hold the “
I/M
” button.
Select with
“ ” or “ ” one of the following settings and confirm with “
VOLUME / ENTER
”:
a) Full scan
:
Starts the complete station scan. The DAB frequency band is scanned for available stations.
b) Manual tune
:
To do so you need to know the station frequency. This can be found on the internet site of
the broadcasting service. Select individual frequencies and confirm with the “
VOLUME /
ENTER
” button.
c) Prune
:
It may be that you can no longer receive some stations after a station scan or change of
location. With this function you can delete these stations from the reception list. Select “YES”
and confirm with “
VOLUME / ENTER
”.
d) System
:
See under “SYSTEM SETTINGS”.
FM
To improve the reception, extend the antenna completely and align it vertically.
In on mode, press the “
POWER / MODE
” button repeatedly to select the FM mode.
AUTOMATIC STATION SEARCH
To start the automatic station search
, select the direction with “ ” or “ ” and then press the
“
VOLUME / ENTER
” knob.
Note:
The radio automatically stops when a station is found.
MANUAL SEARCH
Briefly press the
“ ” or “ ” button to adjust the frequency in 100kHz steps.
STORE PRESET STATION
Is the same as in DAB mode.
