DAB60
/ English Instruction Manual
2
ERP power management
The unit will turn off automatically after 15 minutes in standby mode if there is no audio
signal. To turn on the unit again press the “POWER / MODE” button.
BASIC OPERATIONS
POWER ON / OFF
Press and hold the
“
POWER / MODE
” button to turn the unit on.
During on mode, p
ress and hold “
POWER / MODE
” to turn off the unit in standby mode. The
clock and date are shown in the display.
In standby mode, press the “
POWER / MODE
” button to turn on the unit.
In standby mode, press and hold “
POWER / MODE
” to turn off the unit completely.
SELECTING MODES
During playing mode, press the “
POWER / MODE
” button repeatedly to switch between the
modes DAB, FM or
Bluetooth
®
.
ADJUSTING VOLUME
Rotate the “
VOLUME / ENTER
” knob at the right side to decrease or increase the volume.
DAB
To improve the reception, extend the antenna completely and align it vertically.
1. In on mode, p
ress the “
POWER / MODE
” button repeatedly to select the DAB mode.
2. At the first start the unit will automatically start the scan function and search all available
stations.
3.
During the scan the display will show “DAB Suchlauf ………” together with a slide bar that
indicate the progress of the scan and the number of stations that have been found.
4. After the scan has finished, the unit will select the first alphanumerically found station.
5. To explore the found stations,
select with “ ” or “ ” the desired radio station and press the
“
VOLUME / ENTER
” knob to confirm the selected station.
NOTE:
If DAB reception is poor, dropouts may occur or the sound will be muted, change the
position to improve the reception.
STORE RADIO STATIONS
In either DAB or FM, you can store up to 20 of your favorite stations to the memory. This will
enable you to access your favorite stations quickly and easily.
1. Select the desired station.
Press and hold the “
P
” button. The display will show “Preset
Store” and below “<1: (Empty) >”.
Note:
If there is a station that already stored, it will show the stored
“Station name/
frequency and P#”.
2. Select with
“ ” or “ ” your desired preset station number and the confirm the selection by
pressing the “
VOLUME / ENTER
” knob. The station will be stored and the display will show
“Preset # stored”.
3. Repeat step 1 and 2 to store further stations.
