DAB80
/ English Instruction Manual
3
Information (Info)
When the radio station is playing, press the “
Info | Menu
” button repeatedly to cycle through the
information broadcasted by the radio as follow:
➢
DLS (Dynamic Label Segmenting)
➢
Audio Bit Rate
➢
Signal strength
➢
Mains Power/Battery
➢
PTY (Program Type)
➢
Time
➢
Channel/Frequency
➢
Date
➢
Signal Error
DAB Menu
1.
Press and hold the “
Info | Menu
” button until the display show “DAB <Full scan>.
2.
Select with the “ / “ button the following settings:
•
Full scan
Start an automatic scan.
•
Manual tune
Select the desired channel and search only the selected channel.
•
DRC (Dynamic range compression)
If you are listening to music with a high dynamic range in a noisy environment, you may
wish to compress the audio dynamic range. This makes quiet sounds louder, and loud
sounds quieter. You can change DRC as off, low or high.
•
Prune
Delete all radio stations which are not receivable anymore.
•
TA
When “On” is selected, the radio will receive traffic announcement on some area if the radio
station will provide this service.
•
System
Find the system settings.
FM
1.
Select the mode “FM”.
2.
Press the “
AMS
” button to start an automatic scan. The radio store all local radio stations.
Automatic tune
Press and hold the
“ / “ button to start the automatic tune. The radio stops at the next
receivable radio station.
Manual tune
To manual tune, use the “ “ or “ “ button. And it will fine tune the frequency in a step of
50kHz.
Store preset station
You can store up to 30 FM radio stations.
Is the same as in DAB mode.