DMX INPUT / OUTPUT
Connection to the DMX512 data line is by 5-pin onboard XLR connectors, as defined in the standards document.
For pin assignment see below.
DMX INPUT
(male)
1
GND
2
DMX -
3
DMX +
4
not connected, thru-wired to Pin 4 DMX OUT
5
not connected, thru-wired to Pin 5 DMX OUT
DMX OUTPUT
(female)
1
GND
2
DMX -
3
DMX +
4
not connected, thru-wired to Pin 4 DMX IN
5
not connected, thru-wired to Pin 5 DMX IN
The drawing shows the position of the onboard
connectors. The lower connectors are the
relay output contacts; pin assignment of
CN4/CN5 may vary due to type of relay used.
Please verify using a ohmmeter.
CN1 Relay output #1
CN2 Relay output #2
orange
C (Common)
dark grey
NC (Normally Closed)
light grey
NO (Normally Open)
NOTE: Pin assignment may vary due to relay type used. Please check before use!
CN3 Power Supply
red
+12V DC [24V DC if 24V relays are used]
blue
0V, GND
Summary of Contents for 3202R Mk6
Page 8: ......
