![background image](http://html.mh-extra.com/html/soundigital/evox-12000-1/evox-12000-1_owners-manual_1334426012.webp)
12
GAIN SETING
Necessary equipament:
Ø
Digital AC voltmeter;
Ø
Media with sine wave test tone 60Hz
recorded at 0db;
Ø
Screwdriver 1/8" ( for gain set)
Set up procedure
Turn the gain control all the way
Ø
down.
Ø
Disconnect the output cables from
the amplifier outputs;
Ø
Turn off all processing (bass, treble,
loudness, EQ, etc.);
Ø
Set the source unit volume to 3/4 of
full volume.
Ø
Set the source unit's fader control to
center position;
Ø
Set the variable "LOW" crossover in
500Hz and the "SUBSONIC" in 5Hz;
Ø
Use a 60 Hz sine wave
Ø
Increase the gain control until the
"CLIP" LED starts blinking;
Ø
Return the gain to the limit where
the "CLIP" LED stops blinking and
remains off;
Ø
O n c e y o u h a v e a d j u s t e d t h e
amplifier to its correct voltage
output, turn off the source unit and
reconnect the speaker(s)
Download the tracks for set up in
https://sou
ndigitalusa.com/tracks-for-
set-up/
Summary of Contents for EVOX 12000.1
Page 1: ...1 OWNER S MANUAL 12000 1 ...
Page 13: ...13 WIRING DIAGRAM See RCA Inputs on page 10 É ...
Page 16: ...16 ...