-5-
follow the description of each step carefully.
1.
Connect the battery power (only for FingerVU 1016W Wireless Monitor)
FingerVU 1016W includes an internal battery for its wireless operation. The internal
battery is supplied as its power cable is disconnected, for prevention of full discharge
during the shipping or storage. (System integrators may connect the power cable prior to
shipping)
Using the screw driver included in this package, open the battery cover on the back side
as shown above. Connect the power cable of the battery to the socket as shown above.
Close the battery cover and close the screw holes with the screw hole cover enclosed in
this product.
For FingerVU 1016S Monitor which does not include an internal battery,
please skip this step for installation.
2.
Connect FingerVU WUD (only for FingerVU 1016W Wireless Monitor)
Connect FingerVU WUD Device Dongle to the port placed on top-left of FingerVU
1016W Wireless Monitor, with facing the letters on the device dongle to the front of the
monitor.
Mount FingerVU 1016S, 1016W on Docking Connector
FingerVU 1016S (Wired) Monitor needs connection to a docking connector for use. FingerVU
