4
PRODUCT O
VERVIEW
VOLZNAUX1 Overview
Connect the male RCA Left (white) and Right (red)
audio cables (from the component-set on page 3) to
“INPUT A” on the VOLZNAUX1 module—please
read page 6 for details.
VOLZNAUX1 Harness
Male 8-pin DIN Connetctor.
If present, disconnect the existing 8-pin
connector on the rear of the factory radio.
Replace the factory connector with the
8-pin male DIN connector shown above.
VOLZNAUX1 Module
Connect an optional auxiliary
input to “INPUT B”—see page 6
for details.
Power Wires.
Connect the red wire to a +12V switched
(ignition) power source. Connect the yellow
wire to a co12V power source.
