The SoundField SPS422B
Issue 1.7
User Guide
Page 23
SPS422B Microphone Shockmount Assembly Instructions
List of Parts
1 x Geodesic Suspension Cradle
2 x Elastic Loops
1 x SPS422B Microphone Holder
1 x Stand Mounting Knuckle Joint - 2 pieces, slotted nut and bolt
1 x Allen Screw - 4mm hexagonal head
2 x Knurled Head Screw (Fischer Boom)
Stand Mounting
1
Fit the holder into the cradle (Figure 1). The top four hooks on the holder
should clip onto one elastic loop and the bottom four onto the other. See
Figure 4 for position.
2
Adjust the tension of the elastics so that the holder is held equidistant from
the sides of the cradle.
3
Undo the slotted nut and bolt holding the knuckle (Figure ì3) together and
remove, allowing the two pieces of the knuckle to separate. This will provide
access to the head of the Allen screw.
4
With a 4mm hexagonal screwdriver, fix knuckle to cradle by screwing Allen
screw into one of the two threaded holes on the cradle.
