SoundField DSF-3
User Guide
Controls
Page 8
4.
Delay
A variable delay control is available for the LS/RS pair and can be varied by upto 40ms
in 1ms steps.
To change the delay press the “Delay” button and use the rotary controller to alter the delay.
5.
Low Pass Filter
A low pass filter is provided with a cut-off frequency ranging from 20KHz to50Hz.
To change the cut off frequency press the “LPF” button and use the rotary controller to alter the
frequency.
6.
High Pass Filter
A high pass filter is provided with a cut-off frequency ranging from 20Hz to 200Hz.
To change the cut off frequency press the “HPF” button and use the rotary controller to alter the
frequency.
The C, LFE output Page:
1.
C, LFE Level
The C and LFE output channel can be level trimmed by +/- 10dB in 1dB steps.
To change the output level press the “Level” button - this will change the display to show the level in
the middle of the screen – and use the rotary controller to alter the level.
2.
Polar Pattern
The Polar Pattern control is continuously variable ranging from Omni through Sub-Cardioid,
Cardioid, Hyper-Cardioid to Figure-of-eight and sets the polar patterns used for the stereo pair.
To change the Pattern press the “Pattern” button and use the rotary controller to alter the gain.
