SoundField DSF-3
User Guide
Controls
Page 7
Surround Output Page
The Surround Output Page shows the surround sound output bargraphs and allows you to control the
parameters of the available output pairs. In the case of 5.1 the output pairs are L/R, C. LFE and
LS/RS.
The L/R and LS/RS output Page:
1.
L/R, LS/RS Level
The L/R, LS/RS output pairs can be level trimmed by +/- 10dB in 1dB steps.
To change the output level press the “Level” button - this will change the display to show the level in
the middle of the screen – and use the rotary controller to alter the level.
2.
Width
This control varies the stereo image from zero degrees (mono) through 90 degrees (standard stereo
coincident pair) to an extra wide stereo 180 degrees. The effect of the Angle control can be viewed
on the screen.
To change the Width press the “Width” button and use the rotary controller to alter the gain.
3.
Polar Pattern
The Polar Pattern control is continuously variable ranging from Omni through Sub-Cardioid,
Cardioid, Hyper-Cardioid to Figure-of-eight and sets the polar patterns used for the stereo pair.
To change the Pattern press the “Pattern” button and use the rotary controller to alter the gain.
