Open the program.
The program opens in English. If you would prefer to change the language, choose menu 3.
“Settings”.
You will now see the screen picture
“Settings”.
Choose which language you want under “Select language”. Select which port on your computer
SoundLog should use under “Communications/COM port”.
You can find this information in Windows, once you have connected the cable, under
“Control Panel/System/Hardware/Device Manager/Ports”.
End by pressing “Save”.
You will now see the menu in the language of your choice.
The program is now ready to import the measurements SoundLog has recorded. Connect one
end of the cable enclosed to your computer’s COM port. Connect the other end to the
SoundLog (please see diagram on page 3.).
Now follow the instructions on the screen in order to import the recording
(Step 1)
and later, see
a graph or bar chart
(Step 2)
. If you like, you can change the standard settings for the program
in ”Settings”
(Step 3)
.
6
Summary of Contents for SoundLog
Page 2: ...3 Diagram of set up...