SoundDigital 1000.1 EVOX2 Owner'S Manual Download Page 3

PACKAGE CONTENTS

 01 

1000.1 EVOX2

 Amplifier

 01 Installation quick guide with warranty card

 01 Allen wrench 2.0mm

 01 Allen wrench 2.5mm

 01 Allen wrench 3.0mm

 01 Promotional sticker

INTRODUCTION

3

DEAR CUSTOMER,

CONGRATULATIONS  ON  ACQUIRING  A  PRODUCT  WITH  THE  HIGHEST 
QUALITY AND TECHNOLOGY!

You have just purchased a 

SounDigital

 product of the highest technology and quality, 

so we thank you for your confidence. 

Class D Amplifiers:

Class  D  amplifiers  have  as  main  characteristics  the  audio  quality,  efficiency, 
application  versatility  and  compact  design.  Following  are  the  advantages  of  these 
features:

Audio Quality

 – In the past, Class D products had limited response and for higher 

frequencies, Class AB products performed better, but their efficiency was very low. The 
new technologies introduced by SounDigital resulted in a Class D amplifier with high 
efficiency and superior Class AB performance.

Efficiency

  –  SounDigital  Class  D  amplifiers  have  total  efficiency  (output  +  power 

source)  greater  than  70%,  which  guarantees  lower  battery  consumption  and  less 
heating.

Application Versatility

 – The flat full-frequency response of SounDigital amplifiers 

allows them to be used in all car sound systems. Meeting the demands with extreme 
quality.

Compact  Design

  –  The  high  efficiency  and  high  technology  applied,  allows 

SounDigital  amplifiers  to  be  very  compact,  facilitating  installation  in  vehicles  where 
space is limited.

IMPORTANT INFORMATIONS

 

On  this  manual  you  will  learn  about  the  product,  its  features  and  characteristics,  in 
order  to  obtain  the  best  result  and  to  be  able  to  enjoy  your  music  with 

SounDigital

 

quality and power.

To better understand and take advantage of all the functions of the product and use it 
safely, read this manual carefully and if you have any questions, consult our support by 
email 

[email protected]

Summary of Contents for 1000.1 EVOX2

















Reviews: