SoundCraft Vienna II, User Manual

Page: 58 / 72

54
O
RS55l0
AUX SEND MASTER
·•
Em
Em
AUX SEND MASTEi
7
AUX SEND WASTER
Em
�
AUX SEND WAITER
AUX SEND WASTER
E□J
�
2
3
Aux Master Module RS5530
The Aux Master module has 8 identical sections and therefore only one will be
described.
Level Control
1 Each Aux Send has its own master LEVEL control which has a maximum gain
of+ lOdB at full clockwise rotation. The balanced output buffers give a nominal
output level of +4d8u at the rear panel connectors.
Status
2 The illuminated CUT switch mutes the output when pressed.
3 The AFL switch allows monitoring of the pre-cut, post-insert Aux output on
the Control Room Monitors, Headphones or AFUPA.. bargraph meter.
Output
The output signal is electronically balanced at a nominal level of +4dBu. The output
XLRs are located on the bottom of the Output Group rear connector panel.
Expansion Input
A balanced and bu4dBu input for a client console provides the necessary
interface to the ground compensated Aux busses. The input is via an optional
multi way connector on the rear of the console.
Insert Point
Each Aux insert point is at a nominal level of -2dBu. Separate Send and Return
jacks are provided. The Send is ground-compensated and the Return is
electronically balanced.
The Send and Return jacks are located below the Aux output XLRs.
Aux Master module